Atronic Harmony Slant Top, Installation Manual

Page: 21 / 23

21 June 2008
Harmony™ - Installation Manual
BASIC SETUP
Atronic machines usually come configured as specified
during order processing. However it might be
necessary to reconfigure basic machine settings,
such as denomination, metering, paytable, etc. The-
se settings can not be altered during normal
operation, as they require a machine re-initialisation
for technical or jurisdictional reasons.
Note : Please refer to the document "Manual HI Soft-
ware (version)" relevant for a particular software
version (e.g. C5.1.x.x) for detailed information.
1. Configure the Commboard
This is necessary only, if you have to alter the comm-
board settings, such as progressive mode or chan-
nel allocation.
2. Carry out a RAM Reset (incl. Commboard Clear)
This will clear all machine data, statistics and set-
tings, including progressive jackpot configurati-
on.
3. Carry out the Initial Setup
After a RAM Reset the machine automatically en-
ters the Initial Setup menu. The Initial Setup al-
lows to configure all basic machine setting.
4. Carry out (Progressive) Jackpot Configuration
A PC or notebook with Atronic's Alink Config soft-
ware is connected to the gaming machine and
uploads the progressive jackpot configuration data.
Important : It is necessary to carry out the pro-
gressive jackpot configuration directly after the
Initial Setup. Do not insert credits before the jack-
pot configuration data is uploaded.
In an Atronic Progressive Link™ (APL) the jackpot
configuration has to be carried out at the APL ma-
ster machine only. The jackpot configuration data is
then transferred to all linked APL slave machines.
5. Adjust game settings in the Service Menu
B
ASIC
S
ETUP