Operating / P-Level
45
January 2006 / Rev. 1.0
SELFTEST
CONTINUED
RGB COLOUR TEST
A RGB test screen is displayed, to check screen
size, color balance, brightness and contrast.
Use the 6 knobs at the monitor to adjust screen
geometry and contrast.
CHECKSUM
EPROMs:
The checksum of each game EPROM is calculated.
Security device seed:
Manufacturer use only.
Security device checksum:
Calculates a MD5 checksum (manufacturer use only).
MAIN-COMMBOARD TEST
Data transfer between Comm board and Master
board can be tested. (Only with test interface).
C-BOARD SPEED HANDSHAKE
The function of the Comm board is tested.
(Only with test interface).
ALINK STATUS
Applicable only if several machines are linked via
Alink™ or if machine is configured for Alink™
Standalone progressive Jackpot.
Shows Alink™ status (
Master / Slave / Ready / Error)
for each machine adress 01-32.
Options
GHL Trigger Level and Game Phase are not
used (will show "0").
CRC Errors counts transaction
frame errors on the Alink™ bus.
TOUCH STATUS
Displays current status of touch screen interface
and controller. Option
Touch Counter counts
controller errors.
Horizontal Horizontal Vertical Vertical Pincushion Contrast
Size Position Size Position
Note:
Manufacturer use. Additional
test equipment needed.
Note:
Manufacturer use. Additional
test equipment needed.
SERVICE MENU
Note
:
Layout of monitor controls may
vary.
IIC-PORT DRIVER CHECK
VOLTAGE CHECK
COIN DIVERTER CHECK
TOPLIGHT TEST
DIPSWITCH SETTINGS
SOUND TEST
LAMP TEST
SERIAL I/O TEST
SWITCH TEST
OPTOBOARD TEST
HANDLE TEST
BUTTON TEST
EEPROM TEST
BILL-ACCEPTOR STATUS
BILL-ACCEPTOR DIAGNOSTICS
MONITOR MAGNETIC STATE
RGB-COLOR TEST
CHECKSUM
MAIN-COMMBOARD TEST
C-BOARD SPEED HANDSHAKE
TOUCH STATUS
QUIT
ALINK STATUS
ALINK STATUS:
MASTER
GML TRIGGER LEVEL: 0
GAME PHASE:
0
CRC ERRORS:
0
01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32
.=exists, =ready
X=error, M=master