SAFETY PRECAUTIONS
Please read the manual thoroughly before attempting to install or operate any
Atreum Lighting HYDRA Series system.
Connect the system only to the power sources of the appropriate voltage using the
AC plug type received. Protect power cables from being pinched or damaged.
HYDRA Series systems are high-performance lighting solutions, and operate at
elevated temperatures. Do not touch while in operation.
You should seek service for your system by qualified service personnel if any of the
following occurs:
1.
The power-supply cord or the plug has been damaged
2.
The unit has been exposed to rain or water submersion
3.
The unit exhibits a marked change in performance
4.
The unit has been dropped, or its enclosure or chassis is damaged
GENERAL CARE
Atreum Lighting HYDRA Series systems are passively cooled with zero moving
components. They are designed for years of maintenance-free performance. Some basic
care will keep your system operating at peak performance cycle-after-cycle.
In order for the system to properly cool itself, at least one inch of space is required
between the top of the fixture and the roof of your grow area. Failure to do so may
shorten the fixture lifespan.
To achieve the optimal lifespan and performance of your fixtures, routinely check for
and remove excess dust, debris, and mineral build up from heatsink and LED array.
Cleaning should always be done with the fixture unplugged from its power source
using low-pressure compressed air.
Never use a cloth to clean the diode array. Doing so can scratch or compromise the
integrity of the silicon seal, or dislodge diodes entirely.
To limit degradation, avoid touching the diodes with your hands, even in a powered
off state.
1
