ATouch User Guide
7
screwed ).
x
Installing Touchscreen Controller
Connect all cables / connectors in right places and fix the
controller at the monitor chassis.
x
Power Supply
If you use internal power 5VDC, connect the power
cord (from touchscreen RS-232 controller) to the CRT monitor
electronic board +5VDC.
If the external power supply is used, the +5VDC will be
supplied from the keyboard through the RS-232 cable provided by
ATouch.
x
Fixing Cables
Cables should be fixed well and not movable.
x
After above processes, test if the touch monitor works normally.
3. Reassembling CRT Monitor
After the installation of the touchscreen, reassemble the CRT
monitor back side plastic housing and test if the function of the
touch monitor works well.
4. Sealing
Sealing should be even around the front bezel. The material is
special sponges from ATouch. The adhesive side of the sponge is
stuck on the front bezel, and the special plastic side on the touch
sensor.
Or use the material manufactured by VOLTEK.
(Suggest from VOLTEK : 2A/2E//4A/4E black flame retardant
material)
