Atosa ATO-4B-F, Operating Instructions Manual

Page: 17 / 28

- 16 -
the pipe. Wait a minute, the pilot light will be lighted after the gas
extinguished.
8.2 Igniting the main burner （ hot plates ）
R
evolve the main fire control valve knob anticlockwise after lighting the
pilot light, and then the main fire burner is ignited by the pilot light. When
knob reaches to " " (90 degrees), burner is in the maximum power (Fig.4).
Once again axial press the knob and revolve it anticlockwise, the power of
burner reduces gradually with the rotation angle increases. When knob is
rotated 150 degrees to " ", burner is working with a minimum power
(Fig.5).
8.3 Lighting the fire （ oven ）
①、 Align the OFF indicative line of thermostat valve
knob to the arrow (Figure 6) to close the valve.
②、 Open the underside face plate of oven (figure 7),
thoroughly press the button at the front end of
safety valve, and press the button of the piezo igniter with
another hand simultaneously (figure 8 and figure 9). there
is electric spark between pilot and fire needle. If the fire is not lit, please
Figure 6
Figure 2 Figure 3
Figure 4
Figure 5