Atos Unify OpenScape CP110 Page 47 User Manual Download

Page: 47 / 116

Making calls

Select and confirm the option shown.

Enter the phone number for the forwarding destination. Any destina-

tion previously saved will be overwritten.
Confirm when the complete number has been entered.
Fixed forwarding is saved and activated.

Activate fixed forwarding

Prerequisite:

A fixed forwarding destination is saved



Page 46.

€

Open the idle menu in idle status (



Page 15).

Select and confirm the option shown.

Deactivate fixed forwarding

Press the Forward key.

€

Open the idle menu in idle status (



Page 15).

Select and confirm the option shown.
Fixed forwarding is deactivated. The destination number is retained.

Deleting a fixed forwarding destination

You can delete the destination for fixed forwarding.



Open the menu



Page 18.

Confirm the option shown.

Confirm the option shown. The display shows "Fixed forwarding" and

the forwarding destination.

Select and confirm the option shown.
The forwarding destination is deleted. If fixed forwarding was activa-

ted it is now deactivated. The "Forward" key is deactivated.

Enter destination:

Save?

Fixed call forw.on



Call forrwarding off

Destinations

Call forwarding?

Next forwarding type?

Delete?

Summary of Contents for Unify OpenScape CP110





















































































































Search results

Summary of Contents for Unify OpenScape CP110

Reviews:

Related manuals for Unify OpenScape CP110

Brands by name

Popular brands

Atos Unify OpenScape CP110, User Manual

Search results

Summary of Contents for Unify OpenScape CP110

Reviews:

Related manuals for Unify OpenScape CP110

Brands by name

Popular brands