22
ATORN DFT
5.3 Assigning a different calibration to the opened batch
Before you start
•
The gage is switched on (
key
)
•
The desired batch is opened, the corresponding batch name appears in
the colored header field
Assigning a new calibration
1.
Main Menu (
)
> Batch Modify
> OK > More Settings > OK > Calibration
Assign > OK
2. Select an existing calibration from the list:
Only the calibrations whose calibration method matches the open batch
are displayed.
3. Tap on
OK,
to confirm your selection
4.
2 x
>
, switches to the measurement view for the opened batch
You have now assigned a different calibration to the opened batch.
What you can do next
•
Measure, see Page 23
•
Repeat calibration, recalibration, see page 29