ATORN DFT
21
Batch type Individual (IDV)
: Specify the rest of the measurement proce-
dure to suit your needs (e.g. setting of limits, block size). Confirm each
setting with
OK
. Switch to the measurement view for the newly created
batch:
MEASURE > OK
.
This completes the creation process for a new batch.
What you can do next
•
Measure, see Page 23
•
Assign a different calibration to the batch, see page 22
5.2 Opening a batch
Before you start
•
The gage is switched on (
key
)
Opening an existing batch
1.
Main Menu (
)
> Batches
2. Select the desired batch from the list:
3. Tap on
OK,
to confirm your selection
4.
MEASURE >
OK
The measurement view for the selected batch opens
What you can do next
•
Measure, see Page 23
•
Repeat calibration, recalibration, see page 28
•
Assign a different calibration to the batch, see page 22
