MDSC-1000B
使用指南
14
zero-sheet setting has been completed. Long press the “Return” key to exit the auto
adjustment mode and enter the working mode.
(ii) dynamic learning (not a must)
If the operation effect is not idea after the auto adjustment has been done, such
as too many wrong reports and missing inspections, etc. (especially when the metal
sheets appear up-and-down moving phenomenon during detecting, it is difficult to
control the dynamic learning.). Therefore, suggest increasing dynamic learning after
finishing the auto adjustment.
返回:
Return
确认:
Confirm
自动调节:
Auto Adjustment
零张设定:
Zero-sheet Setting
单张设定:
Single-sheet Setting
双张设定:
Double-sheet Setting
短按单张设定键,单张绿色
LED
闪烁,单张片料动态过机,短按确定键保
存:
Shortly press the “Single-sheet Setting” key and the Single-sheet green LED