MDSC-1000B
使用指南
16
(iii) Manual setting (not a must)
If you feel single-sheet or double-sheet detecting is not sensitive enough or too
sensitive, then you can long press the “Confirm” key for 3s to enter the setting mode.
After that shortly press the “Confirm” key, then the numbers beside the
“Single-sheet” on the LCD will flicker. At this time, you can press “Up” or “Down”
key to adjust the sensitivity value of the single-sheet. The bigger the number, the
higher sensitivity. Then press the “Confirm” key to save the sensitivity setting of the
single-sheet and turn to the sensitivity setting for the double-sheet. At the moment,
the numbers beside the “Double-sheet” on the LCD flickers. The sensitivity
adjustment of the double-sheet can be done as that of the single-sheet. After finishing
adjustment, press the “Confirm” key to save. And during the sensitivity adjustment
for the single-sheet or double-sheet, you can press the “Return” key to exit
adjustment and resume the previous sensitivity setting.
Notes: During sensitivity adjustment for the single-sheet or double-sheet,
that is, when the numbers on the LCD are flickering, the seven steps
①
~
⑦
cannot be done. Non-professionals are not suggested to operate the manual
sensitivity setting.
VII. Warranty agreement
1. The warranty period for this product is 18 months and subject to the equipment’s
bar code. If the product breaks down or appears damage under normal operation as
described in the User Manual, our company shall take the responsibility of
free-charge repair and maintenance of the product.
2. Within the warranty period, if the damage to the product is caused by the following
statements, certain amount of repair and maintenance fees shall be charged.
● The damage to the product is due to wrong usage or at-will dismantlement, repair,
maintenance and remolding of the product;
