Make sure you check the battery level is at least half-full before doing the Time Zone
Setting. If the battery level is not half-full, charge up the watch until it reach to this
level.
English / German language selection:
You can select English or German language for the Day on the LCD display.
1.
Holding S2 (the lower right button) for about 3 seconds while the watch is in the
normal time keeping mode until the LCD displays a City name (3 digits City code)
2.
Press S2 once again and the LCD shows a blinking Day (example TUE).
3.
Push S1 to switch the Day from English to German language or vise versa.
4.
Push S2 to confirm.
Manual Time Setting
Your watch set itself automatically. This manual time setting is an option only when in
case there is no signal around after the battery is replaced. When you go aboard, you
should change the time of your watch using Time Zone setting instead of the Manual
Time Setting.
1.
Holding S2 (the lower right button) for about 3 seconds while the watch is in
the normal time keeping mode until the LCD displays a City name (3 digits
City code)
2.
Press S2 once after another until it shows Hour digits. You can see a “H” on
the LCD representing Hour setting. It is a 24 hours format.
3.
Press S1 to set and S2 to confirm the Hour setting
4.
After confirmation of Hour, the LCD shows “M” representing Minute setting,
press S1 to set and S2 to confirm.
The watch will run to the new Time according to the new time setting automatically after
the confirmation and shows “WAIT”. Just wait until the watch resume normal running.
REMARK:
Make sure you check the battery level is at least half-full before doing the Manual Time
Setting. If the battery level is not half-full, charge up the watch until it reach to this level.