© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
9
All Rights Reserved.
PARTS REQUIRED:
6 pcs -
H6
Phillips Round Head Screw
4 pcs -
P11
Corner Cap
2 pcs -
P18
Ball Entry Cup
8 pcs -
H9
Phillips Flat Head Screw
2 pcs -
P13R
Scorer
4 pcs -
P24
Cup Holder
16 pcs -
P17
Rod Bushing
FIGURE 7
STEP 7:
Carefully peel the paper protective coating from adhesive strips from the back of the
P11
Corner Caps to reveal
adhesive strips. Attach
P11
Corner Caps using
H9
Screws as shown in
FIGURE 7
.
Tighten, but do not strip out H9 Screws.
Attach
P13R
Scorers onto the top of
P2
End Aprons as shown in
FIGURE 7
.
Insert
P17
Rod Bushings onto both
P1
Side Aprons as shown in
FIGURE 7
.
Please make sure to insert
P17
Rod Bushings from the inner side of P1 Side Aprons for correct assembly.
Attach
P18
Ball Entry Cups using
H6
Screws as shown in
DETAIL C
.
Tighten, but do not strip out H6 Screws.
Carefully - Tap
P24
Cup Holders down into
P2
End Aprons as shown in
FIGURE 7
.
P13R
Note:
Red Bead scorer should
be on opposite side of
Ball Return.
P13
Note:
Red Bead scorer should
Pilot Holes
be on opposite side of
Ball Return.
P11
H9
H9
DETAIL C
P17
P18
H6
P24
Note:
Carefully tap
P24
Cup Holders down.
Rubber
Hammer
IMPORTANT NOTE: P17 Rod Bushings may require the use of a rubber hammer for installation into side apron.
With a rubber hammer, lightly tap bushing squarely into place. DO NOT USE STEEL HAMMER!
If a rubber hammer is not available, place a piece of wood squarely on bushing and lightly tap into place.
EUROPEAN
SOCCER STYLE
P28
45° Angle
Cut
Peel the adhesive strip protective coating off the underside of the
P28
Short Playfield Trims, then very carefully
place them along
P3
Playfield as shown in
FIGURE 7
.
2 pcs -
P28
Short Playfield Trim
