© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
7
All Rights Reserved.
PARTS REQUIRED:
12 pcs -
H7
Phillips Round Head Screw
2 pcs -
P7
Ball Catcher
2 pcs -
P6
Goal Box
2 pcs -
P8
Ball Return Tube
STEP 5:
Center the
Do not Strip out the H7 Screws.
P6
Goal Box over the opening in the end panel and attach using pilot holes with
H7
Screws as
shown in
FIGURE 5
.
Center the
P7
Ball Catcher over the opening in the side panel and attach using pilot holes with
H7
Screws
as shown in
FIGURE 5
.
Make sure the round opening of the
P7
Ball Catcher is towards the floor (when table is turned upright).
Repeat for both ends of the table.
Attach
P8
Ball Return Tubes between
P6
Goal Box and
P7
Ball Catcher as shown in
FIGURE 5
.
FIGURE 5
H7
NOTE:
Make sure the round opening
for the ball return tube is towards the
floor (when table is turned upright)
P6
P7
P8
THIS STEP REQUIRES FOUR OR MORE ADULTS.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL. THE TABLE IS VERY HEAVY.
CAUTION:
NOTE:
Make sure the
opening is on this side.
