© 2018 Escalade Sports
For Customer Service Call 1-888-996-2729
5
All Rights Reserved.
PARTS REQUIRED:
2 pcs -
P1
Side Apron
1 pc -
P3
Playfield
STEP 1:
Find a clean, level place to begin the assembly of your
soccer table. We recommend building the table on the
box top to protect the parts during assembly.
It is very important to assemble table on a level and
flat surface. This will keep the end aprons and side
aprons “FLUSH” on the top and bottom edges.
Set
P3
Playfield into the grooves in
P1
Side
Apron as shown in
FIGURE 1
.
FIGURE 1
P1
P1
P3
NOTE:
Graphic on this side.
Groove
PARTS REQUIRED:
8 pcs -
H1
Allen Head Bolt 8 pcs -
H7
Phillips Round Head Screw
2 pcs -
P2
End Apron
1 pc -
T1
Allen
8 pcs -
H3
Flat Washer 8 pcs -
H12
Lock Washer
4 pcs -
P12
Corner Post
Wrench
STEP 2:
Attach
P2
End Aprons onto
P1
Side Apron using
H1
Allen Head Bolts with
H12
Lock Washers and
H3
Flat Washers
as shown in
DETAIL A
.
Do not tighten H1 Bolts at this time.
Slide
P12
Corner Posts onto each end of the
P1
Side Apron and
P2
End Apron. Center
P3
Playfield and tighten
H1
Bolts using
T1
Allen Wrench.
Use
H7
Screws to secure the
P12
Corner Posts as shown in
FIGURE 2. Tighten, but do not strip out H7 Screws.
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY SET P3 PLAYFIELD INTO THE GROOVES
IN P1 SIDE APRONS.
DETAIL A
H1
H7
H7
H3
H3
P12
P1
P1
P12
P12
P12
P2
P2
FIGURE 2
THIS STEP REQUIRES TWO OR MORE ADULTS.
VERY CAREFULLY ATTACH P12 CORNER POST
ONTO EACH P1 & P2 APRON.
NOTE:
P12
Corner Post
should be flush with
bottom of
P1
Side and
P2
End aprons.
NOTE:
Install
P12
Corner Posts
with arrow pointing down.
ATTENTION:
ATTENTION:
IMPORTANT NOTE: Center P3 Playfield
before tightening H1 Bolts.
VERY IMPORTANT! DO NOT TIGHTEN H1 BOLTS AT THIS TIME.
THE P12 CORNER POSTS MUST BE INSTALLED BEFORE
TIGHTENING THE H1 BOLTS. INSTALLATION OF THE P12
CORNER POSTS WILL SQUARE UP THE SIDE AND END APRONS
FOR CORRECT ASSEMBLY.
TIGHTEN THE H1 BOLTS ONLY AFTER THE P12 CORNER POSTS
ARE CORRECTLY INSTALLED.
H12
H12