1
CHARGING BOARD
Charge your board fully before riding for the first time.
Never charge battery when temperature is below 34F (1C) or
above 104F (40C). Ideal charging / operating temperature range
is 50 - 75F (10 - 24C).
Charge in a safe dry area.
Only use the charger provided with your board. Using other
chargers will void your warranty, damage your board, and could
cause an electrical hazard.
Do not leave your board in an uncharged state (less than 30%
charge) for more than a few days. Doing so will decrease
battery life and may eventually prevent battery from charging.
1. Make sure board is powered OFF before charging. Power is
OFF when the red LED light on the board is not lit.
2. Plug charger into charging port on your board (on side of
battery box - near rear truck).
3. Plug the other end of the charger into wall outlet.
4. The light on charger will glow “red” while charging then
change to “green” when board is fully charged. When fully
charged, disconnect charger from wall, then from board.
Charging (red)
Charged (green)
WARNING
CHARGING PROCEDURE
