ATN 7x30, Instructions For Use And Maintenance Manual

Page: 10 / 20

9 10
zontal direction of the binocular. (Or two ends of
one object at horizontal direction)
4.2.2. A
When the azimuth of two targets is
smaller than the azimuth measuring range
(-50~+50 mils) inside the binoculars, aim the
scale line at one end of the reticule at the target
then read the value of the scale at which another
target was located on the reticule. The value is
the measured azimuth mil. As shown in fig. 4, the
azimuth of the target (tank) is 0-20 mils. The azi-
muth between the targets (p-p) is 0-65 mils.
4.2.2.B
When the azimuth of two targets
is bigger than azimuth measuring range
(-50~+50 mils) inside the binoculars, on the target
can be selected to make the necessary measure-
ments in a step by step fashion. The sum of the