15
1ch.Axxx
VxxxFxxx
2ch.Axxx
VxxxFxxx
4ch.Axxx
VxxxFxxx
4ch.Axxx
VxxxFxxx
VxxxFxxx
DxxxIxxx
4.
5.
6.
8.
7.
Below display current DMX controlled smoke
volume value and fan speed;
Or please press ”Function” to switch to 2CH
mode to do appropriate DMX address setting;
Or please press ”Function” to switch to 4CH
mode to do appropriate DMX address setting;
Press “Function” again to revert to 4ch mode
and DMX address setting;
In 4CH mode, there is no operator action for
two seconds, then automatically revert to the
previous status. Upper display current DMX
controlled volume value and fan speed, below
display current DMX controlled duration and
interval value;
9.
Please switch the DMX mode 1ch, 2ch or 4ch by Function.
10.
If desired, connect another
Haze
machine: Plug one end of
another
signal cable in to the output socket (F or H of figure 1) on
the back
of the first
ATMOS
; plug the other end of the signal cable to
the input
socket (G or I of figure 1) on the back of the second
ATMOS.
Follow
the same procedure to link more fog machine, if
desired;
whole link
is daisy chain.
11.
Down. Refer to DMX channel chart in Figure 2 make related
settings. Now start operating with DMX console.
•
If wanting to expedite liquid supply when powered on the machine,
using function of manual fogging can help.
•
Upon receiving DMX signal, except Manual fogging function, all
built-in functions are invalid.
•
DMX signals dismissed, machine recovers display control mode, and
built-in functions are recovered.
