12
Timing Fogging Operation ..............................................................
DUR. xxx
INT. xxx
--> Dura xxx
Intv xxx
Dura xxx
--> Intv xxx
DUR. xxx
INT. xxx
DMX set
Addr- xxx
(Stop)
Cleaning
1.
3.
5.
6.
8.
7.
Press “ Timer” to enter timing fogging status;
Press “Up” or “Down” to adjust the value of
continuous time (3s – 250s);
Press “Up” or “Down” to adjust time value of
interval(5s – 250s). Press “FUNCTION” to move
the arrow up or down;
After setting the timing, press “Timer” to
re-start timing fogging;
After the Self-cleaning process is complete,
return to the previous picture status.
Press again “Timer” to stop Timing
fogging. Please note the machine design of
machine stops working after a delay of 30
seconds;automatically clear the tubing of the
remaining liquid
2.
Under this status, press “ Function” to get into timing setting
menu, please note timing fogging stops at the same moment;
4.
Press again “Function” to switch to adjust the value of Interval,
please note timing fogging still stops at the same moment;
• If wanting to expedite liquid supply when powered on the machine,
using function of manual fogging can help.
• When executing timing fogging, can press “Hold” to switch to
continuous fogging directly.
• When executing timing fogging, can press “Manual” to switch to
Manual fogging directly, this function can be started forcedly under
any status.
