14
Manual Fogging Operation .............................................................
Other Operation Tips .......................................................................
DMX Control Operation ..................................................................
Manual
V100 F100
1ch.Axxx
VxxxFxxx
DMX set
Addr- xxx
*Hold
TimeSet
DMX set
Addr- xxx
1.
3.
•
•
•
As long as heating is completed, under any
status, press “ Manual” (without releasing), the
machine with maximum output and maximum
fan speed fogging;
Upper display DMX mode and DMX address
value, press “Up” or “Down” button to set the
DMX address;
In previous status, it is allowed to press
“Function” to enter the selection of functions
list directly;
Press “Up” or “Down” to move “*” up or
down, press again “Function” to enter the
function selected by “*”, and setting the
menu like previous timing fogging mode or
continuous fogging mode;
There is no operator action for two seconds,
then automatically revert to the previous status;
2.
Release “Manual” to recover previous status.
1.
Connect the DMX 512 controller cable to the input socket (G or I
of figure 1) of the fog machine unit. Make sure the signal cable
polarity is correct. When DMX socket receives effective DMX
signals, the machine enter DMX control mode automatically.
2.
There are 3 DMX modes for choice; 1CH, 2CH, & 4CH, please
choose the mode by Function.
