STK100 Starter Kit User Guide
6-1
Section 6
How to Use the Software
The programmer software is shown below:
Figure 6-1.
6.1
Overview
The programmer uses three main displays – Flash Memory, EEPROM Memory and
Status. Data and information are displayed on these three screens, which are selected
by a mouse-click on the appropriate button. The main menu gives file and programmer
operations and the configuration information is shown just below the menu bar. A status
indicator at the bottom of the screen shows whether an operation was successful – a red
light means that an error has occurred. All menu choices can be selected by using the
mouse or pressing the Alt key with the underlined letter in the menu item.
WINDOWS
SELECTION
MAIN
MENU
DEVICE
SELECTION
SECURITY
RATINGS
HARDWARE
SELECTION
STATUS INDICATOR
AND MESSAGE LINE:
RED = ERROR
YELLOW = IN PROGRESS
GREEN = OK
MEMORY BUFFER
WINDOW - EDITABLE
ASCII PANE
- EDITABLE
Summary of Contents for AVR STK100
