Host Software
5-4
RFID Application Kit ATAK2270 User Manual
4871E–RFID–04/08
5.2.3.1
Write Bit String
The input text box in theWrite Bit String window can be used to enter programming data, which can be
sent to any block. The bit string entered can be freely composed; therefore, it is important to consider the
bit sequence, specified above the text box. For the supported transponder types, typical default configu-
rations can be displayed in the text box by clicking a corresponding Load standand block... buttons.
Clicking the Write button, sends the bit string to the transponder using the write times specified in the
Writing Timing area.
Figure 5-7.
Write Bitstring Window
