Atmel AT43DK325, User Manual

Page: 7 / 31

AT43DK325 USB Controller Dev. Kit User Guide 2-1
3430B–USB–3/04
Section 2
Getting Started
2.1 Electrostatic
Warning
The AT43DK325 Development Board is shipped in protective anti-static packaging. The
board must not be subjected to high electrostatic potentials. A grounding strap or similar
protective device should be worn when handling the board. Avoid touching the compo-
nent pins or any other metallic elements.
2.2 Unpacking the
System
The AT43DK325 Development Kit is supplied with the following:
– AT43DK325 Development Board
– 2-meter Fully Rated USB Cable
– Male-male DB25 Parallel Cable
– Atmel USB CD-ROM with Software and Documentation
Please contact your local Atmel distribution or E-mail usb@atmel.com if any of the
aforementioned items is missing from the package.
2.3 System
Requirements
The minimum hardware and software requirements are:
– 486 processor (Pentium
®
is recommended)
– 128 MB RAM
– 10 MB free hard disk space
– Windows
®
98/2000/ME/XP
– Parallel printer port
2.4 Software
Requirements
The following third party softwares are needed to access and modify the documents and
source code in the CD-ROM:
– OrCAD Capture
®
from www.orcad.com for the .dsn file
– IAR or GNU C Compiler for the sample C source code
– Microsoft
®
Word from www.microsoft.com for the .doc files
– Acrobat
®
Reader
®
from www.adobe.com for the .pdf files
– Winzip
®
from www.winzip.com to open the .zip files