Atmel AT43DK325, User Manual

Page: 10 / 31

Getting Started
2-4 AT43DK325 USB Controller Dev. Kit User Guide
3430B–USB–3/04
2.6.2 Code Base Directory This is the directory where the code base needed by USB Wizard is located. The name
of this directory is \USBWizard\Codebase. There are two main groups of code base
within this directory. The first one is IARbase, which provides necessary code for IAR.
The second one is GCCbase which contains the code for the GCC compiler. The follow-
ing is a brief summary of the directory tree of this code base.
Code base
|
|------------ IARbase
| |
| |------ AT43USB35x
| |------ AT43USB326
| |------ AT43USB325E
|
|------------ GCCbase
|
|------ AT43USB35x
|------ AT43USB326
|------ AT43USB325E
2.6.3 Application
Examples The application examples are also included within this package. They are located in the
\USBWizard\Examples\ directory. This directory contains USB Wizard configuration files
(*.usw files) and the corresponding C files for the application examples. There are five
subdirectories in this directory:
1. Hub_Disabled
2. OCR1A
3. OCR1B
4. PWM_ADC_GPIO
5. SPI
2.6.4 In - System
Programming Tool The SEEPROM Loader allows developers to program the SEEPROM device through
the standard parallel port. The tool is located in the \USBWizard\ISP\ directory.
Please refer to the Readme file for installation instructions.
Please read Section 4 of this document or Section 3 of Atmel’s “USB Wizard: Applica-
tion Examples and Demos” on how to use this utility.