Atmel AT43DK325, User Manual

Page: 19 / 31

SEEPROM Loader
AT43DK325 USB Controller Dev. Kit User Guide 4-3
3430B–USB–3/04
4. Locate the *.hex file to be downloaded, and then click Open to start download-
ing. If successful, a message box will be displayed stating that the download was
a success. Select only one of the *.hex files located in the subdirectories under
\USBWizard\Binary\ directory.
5. Once a successful download is complete, a message box will appear, as shown
in Figure 4-5.
6. Click OK to close the message box.
7. Disconnect the DB25 parallel cable from the J6 connector, then disconnect and
reconnect the board’s USB upstream port to reset the evaluation board.
Another way to reset the board is to click on the Reset to make the board stay in
a Non-active reset state. And then, disconnect and reconnect the board’s USB
upstream port.
Figure 4-5. A Successful Download
8. Clicking Exit terminates the application.