19
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Command
Feedback
Description
IPCFG
IP Addr : x.x.x.x
Netmask : x.x.x.x
Gateway : x.x.x.x
IP Port : x
Displays IP address configuration
IPQuit
IPQuit
Logs out of TCP/IP Connection
IPAddUser X Y
E.g.
IPAddUser Atlona 1234
TCP/IP user was added
Adds a user for TCP/IP control
X= user and Y= Password
IPAddUser
username password
username password
username password
Displays a list of users and passwords
IPDelUser X
TCP/IP user was deleted
Delete a user from TCP/IP X= username
IPDHCP X
IPDHCP X
Turns DHCP on or off X= on, off, sta
IPStatic X Y Z
e.g.
IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
IPStatic X Y Z
e.g.
IPStatic 192.168.1.1
255.255.255.0
192.168.1.200
Sets static IP address
IPStatic Address(X) Netmask(Y) Gateway(Z)
IPPort X
IPPort X
Set the TCP/IP Port
IPLogin X
e.g.
IPLogin off
IPLogin X
e.g.
IPLogin off
Enables IP Login
X= on, off, sta
Broadcast X
e.g.
Broadcast on
Broadcast X
e.g.
Broadcast on
Sets broadcast mode on or off
X= on, off, sta
IPTimeout XX
e.g.
IPTimeout 300
IPTimeout XX
e.g.
IPTimeout300
Determines amount of seconds of inactivity before TCP/IP
disconnects
Each command or feedback is terminated with a carriage return.
Note:
If the command fails or is incorrect the feedback is “Command FAILED”
IP Commands
Command
Feedback
Description
SetCmd x[y]
e.g.
SetCmd on[PWR ON]
SetCmd x[y]
e.g.
SetCmd on[PWR ON]
Sets the RS-232 or IP command for the selected button or
function
x
= on, off, vol+, vol-, and mute
y
= command
e.g.
Set the on command to send the command PWR ON
SetEnd x[y]
e.g.
SetEnd off[CR-LF]
SetEnd x[y]
e.g.
SetEnd off[CR-LF]
Sets the line termination for the chosen command
x
= on, off, vol+, vol-, mute, fbkon, fbkoff, fbkmute
y
= None, CR, LF, CR-LF, Space, STX, ETX, and null
e.g.
Set the command off to have a carriage return and line feed
TrigCEC y
e.g.
TrigCEC on
TrigCEC y
e.g.
TrigCEC on
Triggers the stored CEC command to turn the display on
and off
y
= on, off
TrigRS y
e.g.
TrigRS vol+
TrigRS y
e.g.
TrigRS vol+
Triggers the RS-232 command from RS-232 or IP
y
= on, off, vol+, vol-, and mute
TrigIP y
e.g.
TrigIP vol-
TrigIP y
e.g.
TrigIP vol-
Triggers the IP command from RS-232 or IP
y
= on, off, vol+, vol-, and mute
CtlType x
e.g.
CtlType rs-232
CtlType x
e.g.
CtlType rs-232
Sets the control type
x
= ip, rs-232, cec
e.g.
Set the control type to RS-232
CliMode x
e.g.
CliMode non-login
CliMode x
e.g.
CliMode non-login
Sets the control device’s IP mode
x
= sta, login, non-login
e.g.
Sets the IP mode to non-login
CliUser x
e.g.
CliUser
CliUser x
e.g.
CliUser admin
Sets the IP username for login
x
= username, (blank)
e.g.
Display the IP username by leaving x blank
CliPass x
e.g.
CliPass AtlonA
CliPass x
e.g.
CliPass AtlonA
Sets the IP password for login
x
= password, (blank)
e.g.
Set the IP password to AtlonaA
CliIPAddr x
e.g.
CliIPAddr sta
CliIPAddr x
e.g.
CliIPAddr 192.168.0.23
Sets the IP address of the controlled device
x
= ip, sta
e.g.
Display the IP address of the controlled device
CliPort x
e.g.
CliPort 24
CliPort x
e.g.
CliPort 24
Sets the IP port of the controlled device
x
= port, sta
e.g.
Set the IP port to 24
