manualshive.com logo in svg

Atlona AT-UHD-SW-5000ED, User Manual, Page: 13 / 25

Share
Download
Atlona AT-UHD-SW-5000ED User Manual Download Page 13

13

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

The Control Page includes settings which enable display controls by the switcher. It provides a 
way to program button functions, turn auto switching on/off, and determine the type of control 
commands 

(TCP/IP or RS-232)

 sent out.

Button Control Selection

     Power - Set which device the power button controls
 

None: Power button will turn the UHD-SW-5000ED on and off

 

RS-232: Power button will send power on/off command over HDBaseT using RS-232 to 

 

 

  compatible receivers and displays

 

IP: Power button will send power on/off command over Ethernet using either the LAN 

 

     connection or the HDBaseT connection

     Volume/Mute
 

Audio Out: Volume and mute buttons will control volume output of the switcher

 

RS-232: Volume/Mute buttons will send the commands over HDBaseT using RS-232 to 

 

 

  compatible receivers and displays

 

IP: Volume/Mute buttons will send the commands over Ethernet using either the LAN 

 

     connection or the HDBaseT connection

CEC Control

     Power
 

On - Sends a command over HDBaseT to the HDMI output of the connected receiver to turn 

 

        the connected display on

 

Off - Sends a command over HDBaseT to the HDMI output of the connected receiver to turn 

 

        the connected display off

 

Note:

 CEC may not work with every display type

Summary of Contents for AT-UHD-SW-5000ED


























Reviews:

No comments