Atlona AT-UHD-HDVS-300-KIT, Manual

Page: 38 / 50

AT-UHD-HDVS-300-KIT 38
The Web GUI
Settings page
Auto switch
Click this drop-down list to enable or disable video
auto-switching. When set to On , and a new source is
connected, the AT-UHD-HDVS-300-KIT will automatically
switch to that input (including HDMI IN 5 on the
receiver). Click the Reset button to set auto-switch
settings to factory-default settings. Click the Save
button to commit changes or click the Cancel button to
abort changes.
Fallback input
Click this drop-down list to select the fallback input.
The fallback input is the input designated to switch to
when a source change has occurred. Click the Save
button to commit changes or click the Cancel button to
abort changes.
Switch Timeout (2 - 600)
Enter the auto-switch timeout, in seconds. This value
defines the time interval that must expire before the|
AT-UHD-HDVS-300-KIT switches to another input
(including HDMI IN 5 on the receiver). Click the Save
button to commit changes or click the Cancel button to
abort changes.
Lockout
Click this drop-down list to select the desired lockout
setting. Click the Save button to commit changes or
click the Cancel button to abort changes.
Input Selection
Click the button, next to the input name, to switch to that
input.
USB Host
Defines the behavior of the USB host ports for switching
operations. Refer to USB Modes (page 17) for more
information. Click the Save button to commit changes
or click the Cancel button to abort changes.
Input Label
Click the drop-down list to select the input to be
renamed. Enter the new name of the input in the text
box across from the drop-down list. Click the Change
button to commit changes.