AT-UHD-HDVS-300-KIT
37
The Web GUI
Input / Compliance
The
Input
column lists all available inputs, including
HDMI IN 5
on the receiver. Click the drop-down list for the
desired input, under the
Compliance
column, to select the HDCP setting. Note that the HDCP compliance cannot
be set for the VGA input, as this interface cannot accept HDCP content.
• Compliant
- Reports to the source device that the display (sink) is an HDCP-compliant device. The source will
send HDCP content to the display (sink) device.
• Not Compliant
- Reports to the source device that the display (sink) is an non-HDCP-compliant device.
The source will not send HDCP content.
• Auto
- Automatically detects the presence of HDCP-compliant sink devices. If an HDCP-compliant display is
detected, then HDCP content will be sent. Otherwise, no HDCP content is sent.
Click the
Save
button to confirm the EDID selection. Click the
Cancel
button to abort the changes.
Save Output EDID to
Saves the EDID of the display, connected to
HDMI Out
port on the receiver, to the specified memory location.
Click the drop-down list to select the desired memory location (Memory 1 - Memory 4). Click the
Save
button to
confirm the operation.
NOTE:
The HDCP control feature does
not
provide decryption of HDCP content to non-compliant sink
devices.
