4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
DC 48V
HDMI
MASTER
LAN
4
1
2
3
EDID
LEARN
INT
POWER
AT-UHD-CAT-4ED
IN
HDMI
OUT
HDBaseT
LOCK
RS-232
RS-232
RS-232
RS-232
IR
1
2
3
4
1
OUT
IN
2
3
4
FW
RX
RX
TX
RX TX
RX TX
RX TX
TX
HDBaseT OUT
IR
RX
TX
IR
RX
TX
IR
RX
TX
RS-232
IR
RX
RX
TX
TX
DC 48V
HDMI
MASTER
LAN
4
1
2
3
EDID
LEARN
INT
POWER
AT-UHD-CAT-4ED
IN
HDMI
OUT
HDBaseT
LOCK
RS-232
RS-232
RS-232
RS-232
IR
1
2
3
4
1
OUT
IN
2
3
4
FW
RX
RX
TX
RX TX
RX TX
RX TX
TX
HDBaseT OUT
IR
RX
TX
IR
RX
TX
IR
RX
TX
RS-232
IR
RX
RX
TX
TX
Panel Description
Front Panel
1. HDMI LED - Illuminates when receiving/transmitting signals
2. HDBaseT LEDs - Illuminates when connected to a compatible PoE receiver
3. LOCK LED - Illuminates when buttons are locked
4. Power button - Switch the unit on/off or , when selected within the webGUI or RS-232, the unit
and display
5. EDID
LEDs - Lights up to indicate what EDID mode the unit is in
Button - Switches between internal and learned EDID modes
Back Panel
1. LAN port - Connect to network router for control
2. Master control - Connect to PC or control system for unit control
3. RS-232 / IR control ports - Connect to PC or control system for zone control
4. FW port - Connect to a PC for firmware updating
5. HDMI ports - Connect HDMI source and display to these ports
6. HDBaseT OUT ports - Connect HDBaseT PoE receivers to this port
(
e.g.
AT-UHD-EX-100CE-RX, etc)
Note:
Compatible PoE receivers do not need power
7. DC 48V port - Connect included 48V power supply to this port
1
1
2
2
3
3
4
4
5
5
6
7
Rack Ear x 1
Rack Ear x 1
Mounting Plate x 2
The UHD-CAT can be mounted in three ways: as a single unit in a rack, with a second unit in a
rack, or against a wall/table using the mounting plates.
Single unit mounting will use the long rack ear and short rack ear to affix the unit to the rack.
Two unit mounting will use two short rack ears
(the second will be in the box with the second unit)
and two
mountings plates to affix the two units together inside the rack.
Wall/table mounting will use both mounting plates to affix the unit to a table or wall.
Oval holes on
the rack ears will
always be attached
to the rack.
Circular holes
will always be
attached to
the unit.
Larger oval
hole will be
attached to
the wall/table.
