Atlona AT-UHD-CAT-4ED, User Manual

Page: 12 / 18

12
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
Commands
The command codes are case sensitive, do not change capitalization, spacing, or lettering.
Command Feedback Description
PWON PWON Power ON
PWOFF PWOFF Stand-by
PWSTA PWON/PWOFF Get system power status
Type AT-UHD-CAT-4ED Brings up the model information
Version Y
e.g. Version boot
Version Y
e.g. Version boot
Brings up the software versions
firmware [mcu]
boot [boot]
vtxY [vtxY]
rvrxY [rvrxY]
Mreset Mreset Reset device to manufacture default
CSpara[Y]
e.g. CSpara[38400,8,0,1]
CSpara[Y]
e.g. CSpara[38400,8,0,1]
Set RS232 parameter [Y] is the parameters
e.g. CSpara[38400,8,0,1]
EDIDSW X
e.g.
EDIDSW learn
EDIDSW X
e.g.
EDIDSW learn
Set the EDID mode of the unit
EDIDCopy EDIDCopy Copies the EDID of HDBaseT output 1 to memory
EDIDMSet X EDIDMSet X Set the Internal EDID X= 0-16, sta
HDCPSet X HDCPSet X Switch the EDID reporting between Compliant (on) and non-
compliant (off)
Blink Blink Will blink an LED on the front of the unit
FWUpdate FWUpdate Sets the unit into firmware mode
BCPW X BCPW X Set the power button control. X= local (unit), cec (display), both, sta
TrigCECall X TrigCECall X Sends the CEC command to all displays X= on, off
TrigCECX Y
e.g. TrigCEC2 off
TrigCECX Y
e.g. TrigCEC2 off
Send the CEC command to a specific output X= 1-5 (5 is HDMI) Y= on, off
e.g. Sends the CEC command to turn HDBaseT output 2 off
Lock Lock Locks the front panel
Unlock Unlock Unlocks the front panel
0
STD (sink)
1
1080P 2CH
2
1080P Multi CH
3
1080P DD
4
1080P 3D CH
5
1080P 3D Multi CH
6
1080P 3D DD
7
720P 2CH
8
720P DD
9
1280x800 RGB 2CH
10
1366x768 RGB 2CH
11
1080P DVI
12
1280x800 RGB DVI
13
2160P 2CH
14
2160P Multi CH
15
4K420 2CH
16
4K420 Multi CH
sta
Preferred Timings -