www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
7
568B
Note: A single CAT5 connection can be used in systems not requiring IR extension through the supplied receiv-
ers. If a single CAT5 connection is utilized the embedded EDID setting choice from the dip switch will be the
default for all connected devices. For a single CAT5 connection please use the RJ45-2 ports only.
-
A). Auto EDID: Please set the dip switch to “0000” (off).
Power cycle
the AT-PROHD85M-SR by turning power
off then back on. All connected output displays EDID’s will be copied and forwarded to all connected sources
and the lowest common denominator will be locked in.
Example:
If there is a mix of video resolutions and audio formats such as Dolby Digital, Stereo, 1080p, 720p,
the AT-PROHD85M-SR will default to 720p/Stereo as it is the lowest common denominator, thus all connected
devices will be functionally compatible with each other.
B). Embedded EDID within AT-PROHD85M-SR: Select the appropriate setting from the rear panel dip switch.
Power cycle
the AT-PROHD85M-SR by turning the power off, then back on. All connected inputs and outputs
Example: If you select the combination 1-0-0-0 from the dip switch the AT-PROHD85M-SR will default to dual
CAT5, 1080p/2ch for all connected devices.
