www.atlona.com | toll free:
1-877-536-3976
For International: 1-
408-962-0515
9
8. RS485 port: protocol utilized by compatible control devices to achieve longer distance cable
runs over CAT5
9. Connect the supplied IR
receiver
cable to the AT-PROHD85M-SR to con-
trol the matrix switch from the supplied handheld remote control. Used when the
AT-PROHD85M-SR is in an enclosure and the front panel IR window isn’t visible.
10. To manually select an input and output from the front panel follow these steps.
Step 2: Press the desired input button. The output LED will change to the input selec-
IR REMOTE CONTROL
The AT-PROHD85M-SR remote can control the matrix
either through the front face panel IR receiver window or
the supplied IR receiver cable module. If you use a third
party IR remote control you can learn the IR codes off of
the matrix remote. If you use a third party IR remote sys-
tem controller you can copy and paste the IR HEX code
into the remote control software package.
IR
HEX
codes can be found on t
he supplied CD.
.
There are 2 scenarios
for
code use:
•
1: L
earn all
40
x codes in order to con
trol each
setup
fr
om
the matrix location.
•
2: L
earn 8 x codes
for local zone control
only
.
VERY IMPORTANT:
When connecting IR receivers and IR emitters, be very careful as if they are reversed the IR Eye will
burn-out and also may damage the IR module inside of the switch and Receiver.
TX – Connects to the Switch
RX – Connects to the HDMI Receivers
