manualshive.com logo in svg

Atlona AT-HDVS-200-TX-WP, Manual

Share
Download
Atlona AT-HDVS-200-TX-WP Manual Download Page 35

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK

35

HDMI Audio

 

Click the drop-down list for HDMI 1 and HDMI 2 to select the input audio source used by each HDMI input.

Setting

Description

Auto

Automatically detects the audio source.  If an HDMI cable with embedded audio is 

connected, the system will use the digital audio on the HDMI cable.  If a cable, which 

does not support audio (such as a DVI cable) is connected to the HDMI port, then the 

analog audio from the 

AUDIO IN

 port will be used.

Digital

The HDMI audio will be used as the source.

Analog

The analog source, connected to the 

AUDIO IN

 port, will be used.

The Web GUI

Audio

HDMI Audio (mute)

HDMI Audio (audio select)

L/R Audio (mute)

HDMI Audio

 

Click this toggle to the 

OFF

 position to mute only the HDMI audio.

L/R Audio

 

Click this toggle to the 

OFF

 position to mute all audio on the output.

Summary of Contents for AT-HDVS-200-TX-WP












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands