manualshive.com logo in svg

Atlona AT-HDVS-200-TX-WP, Manual

Share
Download
Atlona AT-HDVS-200-TX-WP Manual Download Page 28

AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK

28

RS-232 page

The Web GUI

Zone

 

When the AT-HDVS-200-TX-WP is connected to the AT-HDVS-200-RX, the system is placed in 

kit mode

.  In this 

mode, the drop-down list boxes will be disabled and the HDBaseT baud rate will be locked at 115200.

If the AT-HDVS-200-TX-WP is connected to another HDBaseT device, such as the AT-UHD-CLSO-824, each of these 

drop-down list boxes can be set to the baud rate of the HDBaseT RS-232 settings on the corresponding device.

TX RS-232

 

The RS-232 settings of the RS-232 port on the AT-HDVS-200-TX-WP.  Click the 

Save

 button to save the settings.

Setting

Description

Baud rate

Sets the baud rate.  The following options are available: 2400, 9600, 19200, 38400, 

56000, 57600, 115200.

Data bit

Sets the number of data bits used to represent each character of data.  The following 

options are available:  7 or 8.

Parity

Sets the parity bit, which can be included with each character to detect errors during 

the transmission of data.  The following options are available:  None, Odd, or Even.

Stop bit

Sets the stop bit.  Stop bits are sent at the end of each character, allowing the client 

to detect the end of a character stream.  The following options are available:  1 or 2.

Summary of Contents for AT-HDVS-200-TX-WP












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands