AT-ETU-SYNC
11
The AT-ETU-SYNC includes 10 EDID modes, which can be selected using the
EDID
dial. Refer to
EDID Modes (page
17)
, for details on supported features for each EDID mode.
1.
Power the AT-ETU-SYNC.
2. Rotate the
EDID
dial to the desired EDID mode (0 - 9). Refer to the table above for a listing of available EDID
modes.
3.
Connect an HDMI cable from the display to the
HDMI OUT
port on the AT-ETU-SYNC.
4.
Connect another HDMI cable from the source to the
HDMI IN
port on the AT-ETU-SYNC.
5.
Connect the 5V DC power supply between the
FW
/
USB
port, on the AT-ETU-SYNC,
and an available AC outlet.
6. Power the source.
7.
Power the sink device.
8.
The source will use the selected EDID mode when sending audio/video data to the sink device.
Selecting an EDID
Mode
Description
Mode
Description
0
Learn mode
5
4K 60 4:2:0 / multichannel (HD lossless)
1
1080p 3D / 2 channel
6
4K 60 4:2:0 HDR / 2 channel
2
1080p 3D / multichannel (lossless)
7
4K 60 4:2:0 HDR / multichannel (HD lossless)
3
1080p DVI
8
4K 60 4:4:4 8-bit / 2 channel
4
4K 60 4:2:0 / 2 channel
9
4K 60 4:4:4 8-bit / multichannel (HD lossless)
2
EDID dial
IMPORTANT:
By default, EDID mode 0 is blank. If an EDID has not been saved to mode 0, then refer
to
Learning an EDID (page 12)
for information.
NOTE:
The
EDID
dial can be set to any EDID mode, while the AT-ETU-SYNC is powered and
connected to the system.
Basic Operation
