Atlas SUNTEST CPS, Operating Manual

Page: 16 / 32

Operating manual SUNTEST CPS / CPS+
- 16 -
5
Accessories
Item Accessories Description Ident no.:
1 Sensors:
1.1 XenoCal UV sensor Measurement of irradiance
Measurement range 300 - 400 nm 5500 7270
1.2 XenoCal global sensor Measurement and calibration of irradiance
Measurement range 300 - 800 nm 5500 7271
1.3 Adapter table for XenoCal sensors Holding plate for insertion of the XenoCal sensor
in the testing chamber 5507 7745
1.4 Black standard sensor (BST sensor) Measurement of the black standard temperature
(BST) 5500 1490
1.5 White standard sensor (WST sensor) Measurement of the white standard temperature
(WST) 5500 1491
1.6 Sensor WST set Measurement of the white standard temperature
(WST), separate readout device is necessary 5507 7906
1.7 Adapter table for BST and WST
or Radialux sensors Holding plate for inserting the SST and WST or
Radialux sensors in the testing chamber 5605 2825
1.8 XENOVIEW, serial 9-pole Software package for transferring the test
parameters to a PC 5507 6813
1.9 XENOVIEW, serial 25-pole Software package for transferring the test
parameters to a PC 5507 6812
2 Filters:
2.1 UV special glass In addition to the coated quartz disk for working
with wavelengths greater than 290 nm 5605 2371
2.2 Special window glass In addition to the coated quartz disk for working
with wavelengths greater than 310 nm 5605 2372
2.3 Solar standard Filter according to COLIPA and DIN 67501 5607 7759
2.4 Solar ID65 Filter for light exposure according to the ICH
guideline (only in combination with 5605 2372) 5607 7769
2.5 Uncoated quartz disk Instead of the coated quartz disk for higher
black standard temperatures 5605 2373
3 Testing table
3.1 Water-cooled testing table
(contact cooling) For light exposure of temperature-sensitive
materials 5605 2389
4 Covering sheets
4.1 Set of covering sheets Covering sheets for direct visual comparison of
the weathered and unweathered test areas 5606 0361