- 15 -
Operating manual SUNTEST CPS / CPS+
!
ON (I) / OFF (O) switch
"
Door switch for test chamber door
#
Safety switch for lamp replacement
$
Temperature safety device
4
Description of functions
Figure 8
4.5
Safety devices
There are safety and protection devices that increa-
se the operational and functional safety of the unit:
•
To switch off the unit in an emergency, set the ON (I) /
OFF (0) switch
!
to position "OFF (0)".
•
A door switch switches off the unit when the test cham-
ber door
"
is opened.
•
A safety switch interrupts the power supply when the
covering hood
#
of the assembly compartment
is re-
moved.
•
A temperature safety device
$
switches off the unit if
there is a danger of the Xenon lamp getting overheated
because of insufficient cooling.
Figure 9
4.6
Safety markings
Please check whether the safety markings mentio-
ned below have been put on the unit.
If any of the safety markings is absent, please inform
your supplier.
•
The safety marking "Pull out power plug before ope-
ning the device!"
!
on the rear side of the unit warns
you not to touch live parts of the unit when you open
the device.
!
Pull out mains plug
Pull out mains plug be-
fore opening the device!
