background image

– 16 –

AtlasIED.com

TELEPHONE: (800) 876-3333

[email protected]

1601 JACK MCKAY BLVD. 

ENNIS, TEXAS 75119 U.S.A.

©2021 Atlas Sound L.P. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a registered trademark of Innovative Electronic Designs LLC. All Rights Reserved. 

All other trademarks are the property of their respective owners. All specs are subject to change without notice. DOC 1240B Ver 1.3  ATS005583 RevA 4/21

Limited Warranty

All products manufactured by AtlasIED are warranted to the original dealer / installer, industrial or commercial purchaser to be free from defects in 
material and workmanship and to be in compliance with our published specifications, if any. This warranty shall extend from the date of purchase for 
a period of three years on all AtlasIED products, including SOUNDOLIER brand, and ATLAS SOUND brand products except as follows: one year on 
electronics and control systems; one year on replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses 
and lamps carry no warranty. AtlasIED will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the 
product has been applied and used in accordance with our published operation and installation instructions. We will not be responsible for defects 
caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water 
immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered, serviced or installed 
in other than a workman like manner. The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All 
warranty returns must comply with our returns policy set forth below. When products returned to AtlasIED do not qualify for repair or replacement 
under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written 
request for an estimate of repair costs before any nonwarranty work is performed. In the event of replacement or upon completion of repairs, return 
shipment will be made with the transportation charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLASIED 
SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE 
INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT 
NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability.  
This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Service

Should your IP100 Series require service, please contact the AtlasIED warranty department through the online warranty claim process.

Online Warranty Claim Processes

 

1.  Warranty submissions are accepted at: https://www.atlasied.com/warranty_statement where the type of return Warranty or Stock return can be    
 selected. 

2.  Once selected, you will be prompted to enter your login credentials. If you do not have a login, register on the site. If already logged-in, navigate to  
 

this page by selecting “Support” and then “Warranty & Returns” from the top menu. 

3.  In order to file a Warranty Claim, you will need: 

 

A.  A copy of the invoice / receipt of the purchased item 

 

B.  Date of Purchase 

 

C.  The product name or SKU 

 

D.  The serial number for the item (if no serial number exists, enter N/A) 

 

E.  A brief description of the fault for the claim 

4.  Once all required fields are completed, select the “Submit Button”. You will receive 2 emails: 

 

1.  One with a confirmation of the submission 

 

2.  One with a case# for your reference should you need to contact us. 

Please allow 2-3 business days for a response with a Return Authorization (RA) number and further instructions. 

AtlasIED Tech Support can be reached at 1-800-876-3333 or atlasied.com/support.

Visit our website at www.AtlasIED.com to see other AtlasIED products.

A copy of the DoP can be found at www.AtlasIED.com/SM42TEN-(B or WH)

Summary of Contents for IP100

















Reviews: