– 13 –
IP100 / IP108 / IP116
Owner’s Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Electrical, Analog
Supply Voltage
12V DC
Rated Input Current
3 Amps Max (36W)
Relay Contact Rating
1A @ 30VDC Max
Connectors
Power
2-pin Phoenix, 3.81mm Spacing with Locking Screws
USB 2.0
4 Rear
Ethernet (1 or 3)
Control (10 / 100 / 1000 Mbps), CobraNet
®
Digital Audio (100 Mbps),
Dante
®
Digital Audio (100 / 1000 Mbps)
Video (2)
VGA / HDMI
Auxiliary Audio Input (2)
6-pin Phoenix, 3.81mm Spacing
Opto-Isolated Logic Inputs (Typical of 2)
10-pin Phoenix, 3.81mm Spacing
Relay Outputs (Typical of 2)
12-pin Phoenix, 3.81mm Spacing
Environmental
Operating Temperature Range
(+32 °F+104 °F) 0 °C+40 °C
Storage Temperature Range
(–4 °F+158 °F) –20 °C+70 °C
Dimensions and Weight
Rack Mount Requirements
1 RU, 19"
Dimensions (Without Rack Ears) - Unit
17"W x 1.75"H x 12.25"D (432mm x 44mm x 311mm)
Weight - Unit
10.85 lbs. (4.92kg)
Agency Approvals
North America Agency
UL
Testing Standard North America
Conforms to UL 60950-1 (Ed.2)
Conforms to UL 62368-1 (Ed.2)
Certified to CSA C22.2 No. 60950-1-07 (Ed.2)
Certified to CSA C22.2 No. 62368-1:2014 (Ed.2)
IEC 60950-1: 2005
IEC 62368-1: 2014
CB Certificate
China CCC (only on IP108-D and IP116-D)
FCC / IC
CFR, Title 47, Chapter I, Part 15 Subpart B
ICES-003, Issue 6
EMC / CE
(only on IP108-D and IP116-D)
CISPR 32:2015
CISPR 24:2010
EN55032:2015
EN55024:2010
IEC 61000-3-2:2014
IEC 61000-3-3:2013
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
