background image

Owner’s Manual

HPA-DAC4

Dante

®

 Accessory Card

 AtlasIED.com

 – 12 –

Specifications are subject to change without notice.

1601 Jack McKay Blvd. • Ennis, Texas 75119  U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Limited Warranty

 

All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or 

commercial purchaser to be free from defects in material and workmanship and to be in compliance 

with our published specifications, if any. This warranty shall extend from the date of purchase 

for a period of three years on all AtlasIED products, including SOUNDOLIER brand, INNOVATIVE 

ELECTRONIC DESIGNS brand, and AtlasIED brand products except as follows: one year on 

electronics and control systems; one year on replacement parts; and one year on Musician Series 

stands and related accessories. Additionally, fuses and lamps carry no warranty. AtlasIED will solely 

at its discretion, replace at no charge or repair free of charge defective parts or products when the 

product has been applied and used in accordance with our published operation and installation 

instructions. We will not be responsible for defects caused by improper storage, misuse (including 

failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water 

immersion, lightning discharge, or malfunctions when products have been modified or operated 

in excess of rated power, altered, serviced or installed in other than a workman like manner. The 

original sales invoice should be retained as evidence of purchase under the terms of this warranty. 

All warranty returns must comply with our returns policy set forth below. When products returned to 

AtlasIED do not qualify for repair or replacement under our warranty, repairs may be performed at 

prevailing costs for material and labor unless there is included with the returned product(s) a written 

request for an estimate of repair costs before any nonwarranty work is performed. In the event of 

replacement or upon completion of repairs, return shipment will be made with the transportation 

charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL 

DAMAGES FOR PERSONAL INJURY, ATLASIED SHALL NOT BE LIABLE IN TORT OR CONTRACT 

FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE 

INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF 

ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE.

AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf, 

any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may 

have other rights which vary from state to state.

Service

Should your HPA-DAC4 require service, please contact the AtlasIED warranty department at

1-877-689-8055, ext. 277 or www.atlasied.com/support to obtain an RA number.

AtlasIED Tech Support can be reached at 1-800-876-3333 or www.atlasied.com/support.

Visit our website at www.AtlasIED.com to see other AtlasIED products.

©2018 Atlas Sound L.P. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. 

IED is a registered trademark of Innovative Electronic Designs LLC. All Rights Reserved. All other trademarks are the property of their 

respective owners. All specs are subject to change without notice. ATS005717 RevA 1/18  P/N 493567

Summary of Contents for Dante HPA-DAC4













Reviews: