manualshive.com logo in svg

Atlas Copco PFD1500RA-180, Product Instructions

Share
Download
Atlas Copco PFD1500RA-180 Product Instructions Download Page 2

2

© Atlas Copco Industrial Technique AB - 9836 6024 01

Table of Contents

Product Information................................................................................................ 4

General Information .......................................................................................... 4

Safety Signal Words .............................................................................. 4

Warranty ................................................................................................ 4

Website.................................................................................................. 4

ServAid .................................................................................................. 5

Safety Data Sheets MSDS/SDS............................................................ 5

Country of Origin ................................................................................... 5

Dimensional Drawings........................................................................... 5

Overview........................................................................................................... 5

Applications ........................................................................................... 5

Main components and functions............................................................ 6

Technical Product Data ......................................................................... 7

Accessories ........................................................................................... 7

Starting position and drilling depth ........................................................ 7

Speed .................................................................................................... 9

Velocity rapid advance – PFD1500RA-R (only for models with
rapid advance)..................................................................................... 10

Feed rate ............................................................................................. 11

Service Overview............................................................................................ 11

Service Recommendations.................................................................. 11

Installation ............................................................................................................. 12

Installation Requirements ............................................................................... 12

Air quality............................................................................................. 12

Air Lubrication Guide ........................................................................... 12

Compressed Air Connection................................................................ 12

Installation Instructions ................................................................................... 12

Installing the rapid advance kit ............................................................ 12

Changing the spindle........................................................................... 17

Installing the scraper kit, for drills with indexer .................................... 19

Installing the drill.................................................................................. 21

Installing the indexer............................................................................ 23

Installing the ChipLet ........................................................................... 25

Changing the air inlet adapter ............................................................. 27

Installing the scraper kit, for drills without indexer ............................... 28

Preparation for the spindles 4141 0253 XX......................................... 29

Operation ............................................................................................................... 31

Ergonomic guidelines ..................................................................................... 31

Configuration Instructions ............................................................................... 31

Replacing modules .............................................................................. 31

Changing the speed ............................................................................ 32

Changing the feed rate ........................................................................ 33

Operating Instructions..................................................................................... 34

Summary of Contents for PFD1500RA-180





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands