background image

Introduction

Thank you for choosing a product from Atlas
Copco. Since 1873, we have been committed to
finding new and better ways of fulfilling our
customers' needs. Through the years, we have
developed innovative and ergonomic product
designs that have helped customers improve and
rationalize their daily work.
Atlas Copco has a strong global sales and service
network, consisting of customer centers and
distributors worldwide. Our experts are highly
trained professionals with extensive product
knowledge and application experience. In all
corners of the world, we can offer product support
and expertise to ensure that our customers can
work at maximum efficiency at all times.
For more information please visit:
www.atlascopco.com
Construction Tools EOOD
7000 Rousse
Bulgaria

About the Safety and
operating instructions

The aim of the instructions is to provide you with
knowledge of how to use the power packs in an
efficient, safe way. The instructions also give you
advice and tell you how to perform regular
maintenance on the power packs.
Before using the power packs for the first time you
must read these instructions carefully and
understand all of them.

Safety instructions

To reduce the risk of serious injury or death to
yourself or others, read and understand the Safety
and operating instruction before installing,
operating, repairing, maintaining, or changing
accessories on the machine.
Post this Safety and operating instruction at work
locations, provide copies to employees, and make
sure that everyone reads the Safety and operating
instruction before operating or servicing the
machine. For professional use only.
In addition, the operator or the operator's employer
must assess the specific risks that may be present
as a result of each use of the machine.

Safety signal words

The safety signal words Danger, Warning and
Caution have the following meanings:

DANGER

Indicates a hazardous
situation which, if not avoided,
will result in death or serious
injury.

WARNING

Indicates a hazardous
situation which, if not avoided,
could result in death or
serious injury.

CAUTION

Indicates a hazardous
situation which, if not avoided,
could result in minor or
moderate injury.

Personal precautions and
qualifications

Only qualified and trained persons may operate or
maintain the machine. They must be physically
able to handle the bulk, weight, and power of the
machine. Always use your common sense and
good judgement.

Personal protective equipment

Always use approved protective equipment.
Operators and all other persons in the working
area must wear protective equipment, including at
a minimum:

Protective helmet

Hearing protection

Impact resistant eye protection with side
protection

Respiratory protection when appropriate

Protective gloves

Proper protective boots

Appropriate work overall or similar clothing (not
loose-fitting) that covers your arms and legs.

Drugs, alcohol or medication

 WARNING

   

Drugs, alcohol or medication

Drugs, alcohol or medication may impair your
judgment and powers of concentration. Poor
reactions and incorrect assessments can lead to
severe accidents or death.

Never use the machine when you are tired or
under the influence of drugs, alcohol or
medication.

LP 13-30 P

Safety and operating instructions

© Construction Tools EOOD | 3392 5254 01 | 2017-04-13
Original instructions

5

Summary of Contents for LP 13-30 P

























Reviews: