Technical data
Machine data
LP 13-30 P
Height, mm (in.)
705 (27.7)
Width, mm (in.)
600 (23.6)
Length, mm (in.)
745 (29.3)
Temperature range, °C (°F)
-20 to 40 (-4 to 104)
Weight including oil, kg (lb)
91 (200 )
Flow, l.p.m. (US gal/min)
20-30 (5-8)
EHTMA category
C and D
Nominal pressure, bar (psi)
125 (1,813)
Standard pressure setting, bar (psi)
150 (2,200)
Circuit type
Open centre
Pump type
Gear pump, directly driven from the engine crankshaft by means
of a flexible coupling.
Oil tank capacity, litres (US gallon)
7 (1.8)
Filtration
25µ filter in return line. Filter by-pass valve in valve block.
Cooling system
Thermostatically controlled air blast oil cooler.
Engine
Type
Honda GX 270 QX, air cooled, 1 cylinder 4-stroke petrol engine
with oil alert system and transistor ignition system.
Performance, HP (kW)
13 (9.6) at 3,600 r.p.m.
Fuel
Unleaded petrol.
Engine oil
Consult engine manual.
Fuel tank capacity, litres (US gallon)
6.5 (1.7)
Starter
Recoil start
Noise declaration statement
Guaranteed sound power level
Lw
according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level
Lp
according to EN ISO 11203.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools EOOD, cannot be held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
LP 13-30 P
Safety and operating instructions
© Construction Tools EOOD | 3392 5254 01 | 2017-04-13
Original instructions
19
