Atlas Copco LF 10, Instruction Book

Page: 17 / 75

2920 7090 00
15
Instruction book
CD adsorption dryer
LF 2-3 on 90 and 250 receiver
Heavy duty air inlet filter
For PP-BM-TM-FF versions
Oil level switch
Not available for LF
Receiver wheel set
Wheelset for 90/250 receiver
Power supply cable
(3 m)
with red CEE 3-pole plug 16A L = 3 mtr
Auto restart
offload valve (solenoid valve to make sure unit will
start after power failure)
Timer drain
(solenoid operated)
Used For DOL 230v/50hz and
400v/50hz Units Invalid Combinations for Any other voltages or
frequencies and YD units
2.3 Air flow
LF 2 up to LF 10
Air drawn through air filter (AF) and inlet silencer (1) into cylinders (2 and 3) is compressed, then discharged
through cooler piping (4) and (5) and check valve (CV) / unloader valve (UA) into air receiver (AR).