It is necessary to program the start/stop commands in successive order time-wise. Program
the commands from ‘Monday’ till ‘Sunday’, e.g.:
•
07.30 Start Compressor
•
07.30 Setpoint 1
•
08.30 Setpoint 2
•
18.00 Stop Compressor
Make sure that the timer function is activated (‘Activated’). If not, the programmed start/stop
commands will not be executed.
The timer can be deactivated again. In this case, the programmed start/stop commands will
not be executed (but remain in the memory of the regulator).
Modifying a command
Suppose the command to stop the compressor on Saturday 18:00 is to be modified, i.e. stopping at 17 o'clock
instead of 18 o'clock.
• Starting from the Main screen, press the key ‘Menu’ (F1), press the arrow down key (1) until the option
‘Modify Params’ is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• Use the arrow down key (1) to scroll until the option ‘Clock Function’ is followed by a horizontal arrow.
Press the tabulator key, the following screen appears:
‘Clock Function’
‘Not Activated’
.
‘Menu’
‘Mod.’
‘Del.’
F1
F2
F3
• Press the tabulator key (2), the following screen appears:
‘Monday’
‘Tuesday’
‘Wednesday’
‘Menu’
‘Del.’
F1
F2
F3
• Scroll through the display until ‘Saturday’ is followed by a horizontal arrow. Press the tabulator key (2).
If necessary, scroll through the commands until the command to be modified is followed by a horizontal
arrow. Press the key ‘Mod.’, the first two digits of the command start flashing. Modify as required using
the scroll keys, i.e. in the example above change 18 to 17 using the arrow up key (1).
• If necessary, press the tabulator key (2) to go to the next field to be modified, the minutes indication and
the start/stop/setpoint indication.
• Press the key ‘Prog’ to program the new command or the key ‘Canc’ to quit without reprogramming.
Adding a command at the end of an existing list
• Starting from the Main screen, press the key ‘Menu’ (F1), press the arrow down key until the option
‘Modify Params’ is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• Use the arrow down key (1) to scroll until the option ‘Clock Function’ is followed by a horizontal arrow.
Press the tabulator key, the following screen appears:
Instruction book
2920 1634 04
47