Atlas Copco Dynapac F1800C, Operation & Maintenance Manual

Page: 60 / 318

4
3 Securing the load
A
The following instructions for securing the load on the low-bed trailer consist merely
in examples of how to secure the load correctly.
A
Always comply with the local regulations for securing the load and for correct use of
load securing equipment.
A
Normal driving mode also includes emergency braking, evasive manoeuvres and
poor road surfaces.
A
Use should be made of the different methods available for securing loads (positive
fit, force connection, diagonal lashing, etc.) in accordance with the specific
transport vehicle.
m
The low-loader must have the necessary number of lashing points with a lashing
strength of LC 4,000 daN.
m
The total height and total width must not exceed the maximum
permissible dimensions.
m
The ends of lashing chains and straps must be secured to prevent them working
loose and falling down unintentionally!
3.1 Prepare the low loader
m
The floor of the loading space must always be undamaged, free of oil and mud, dry
(residual moisture is permitted without accumulations of water) and swept clean!