►
If any significant changes are made to the
hydraulic installation, a new acceptance inspection
is to be carried out in accordance with the relevant
national safety provisions.
WARNING Hot hydraulic oil squirting out
The hydraulic system is under high pressure.
Hydraulic lines may spring a leak or burst. Hydraulic
oil squirting out can lead to serious injury.
►
When attaching the hydraulic attachment do not
lay any hydraulic lines through the carrier's cab.
►
Only use hydraulic lines which comply with the
following quality requirements:
●
For the function open and close
Hydraulic hoses with 4 reinforcement steel wires
according to DIN EN 856 4SH,
Hydraulic pipes, seamless cold-drawn steel pipes
according to DIN EN 10305
●
For the function turn
Hydraulic hoses with 2 steel plaitings according
to DIN EN 853 2SN,
Hydraulic pipes, seamless cold-drawn steel pipes
according to DIN EN 10305.
Media/consumables,
precautions
WARNING Hot hydraulic oil under high
pressure
Hydraulic oil will squirt out under high pressure if
there is a leakage. The jet of oil might penetrate
people's skin and cause permanent damage. Hot
hydraulic oil can cause burns.
►
Never use your hands to find leaks.
►
Always keep your face away from a possible leak.
►
If hydraulic oil has penetrated your skin consult a
doctor immediately.
WARNING Hydraulic oil spills
Spilt hydraulic oil can make a floor slippery. If people
slip they can be injured. Hydraulic oil is
environmentally harmful and must not penetrate the
ground or enter the water table or water supplies.
►
Make sure not to spill any hydraulic oil.
►
Immediately clean the floor if you have spilt
hydraulic oil.
►
Observe all safety and environmental protection
provisions when handling hydraulic oil.
WARNING Skin infections/diseases due to
oil and grease
Hydraulic oil and grease can cause rashes (or even
eczema) if they come into contact with the skin.
►
Avoid all skin contact with hydraulic oil and grease.
►
Use a suitable skin protection product.
►
Always wear safety gloves when working with
hydraulic oil or grease.
►
Immediately clean any skin that has been
contaminated by oil or grease with water and soap.
Explosion and fire, precautions
DANGER Explosion and fire
Explosions cause serious injury or death.
Explosives being cut by the hydraulic demolition
cutter may lead to an explosion.
►
Never operate the hydraulic demolition cutter in
the direct vicinity of explosives.
►
Make sure that no explosives are hidden in the
concrete.
►
Check gas line position plans of the complete
construction area.
DANGER Explosion and fire
Operating the hydraulic demolition cutter may create
sparks which ignite highly flammable gases. This
may lead to fire or an explosion.
►
Never work in an environment with highly
flammable substances.
►
Make sure that there are no hidden sources of gas
in the work area.
►
Check gas line position plans of the complete
construction area.
DANGER Explosion and fire
Dust-rich air can form an explosive atmosphere which
may ignite when operating the hydraulic demolition
cutter. This may lead to fire or an explosion
►
Never operate the hydraulic demolition cutter in
an explosion-hazard atmosphere.
►
Always provide sufficient ventilation when working
in buildings or in a confined area.
© 2015 Construction Tools GmbH | No. 3390 5141 01 | 2015-11-16
Original instructions
12
CC 1700 U, 1700 S
SAFETY INSTRUCTIONS
