39
connected to the NetPower 303 WN either directly or through an external Switch,
and have TCP/IP installed and configured to obtain an IP address through a DHCP
server or a fixed IP address that must be in the same subnet of the NetPower 303
WN. The default IP address of the NetPower is
192.168.1.251
and subnet mask is
255.255.255.0
. The best and easy way is to configure the PC (
DHCP client
) to
get an IP address from the NetPower 303 WN (
DHCP server
). For the first time
please connect the PC directly to NetPower 303 WN.
Please follow the steps below for PC’s network environment installation. First of all,
please check your PC’s network components. The TCP/IP protocol stack and
Ethernet network adapter must be installed. If not, please refer to MS Windows
relative manuals.
Username:
admin
Password:
atlantis
IP LAN address: (
192.168.1.251
), Subnet Mask (
255.255.255.0
)
IP WAN adress:
client DHCP
DHCP Server: enalble (
192.168.1.10-192.168.1.50
)
SSSID=
A02-PL303-WN
Channel=
6
, Authentication:
WPAPSK
, Encrypton:
AES
, Encryption Key:
NetPower303WN
7. INTERNET EXPLORER CONFIGURATION
Now open IE, go to
Instruments
menu, select the
Connections
tab and select
one of the following options:
Never use remote connection
Use remote connection if another network connection isn’t available
8. TCP/IP CONFIGURATION
Configuring PC (Windows 2000)
Go to
Start / Settings / Control Panel
. In the Control Panel, double-
click on
Network and Dial-up Connections
.
Double-click
LAN Area Connection/Wireless
.
In the
LAN Area Connection/Wireless
Status window, click
Properties
.
Select
Internet Protocol (TCP/IP)
and click
Properties
.