18
dominating potential market base, virtually guarantee cost effective and high
performance Fast Ethernet solutions in the years to come.
100Mbps Fast Ethernet is a new standard specified by the IEEE 802.3 LAN
committee. It is an extension of the 10Mbps Ethernet standard with the ability to
transmit and receive data at 100Mbps, while maintaining the CSMA/CD Ethernet
protocol. Since the 100Mbps Fast Ethernet is compatible with all other 10Mbps
Ethernet environments, it provides a straightforward upgrade and takes advantage
of the existing investment in hardware, software, and personnel training.
2.
Features
NetMaster G devices were designed for easy installation and high performance in an
environment where traffic on the network and the number of user increase
continuously.
NetMaster G devices can offer solutions in accelerating small Ethernet workgroup
bandwidth. Other key features are:
IEEE 802.3, 802.3u and 802.3z compliant
Support 32-bit 33/66Mhz PCI Local Bus Master high-speed operation of
Rev.2.1/2.2 specification
Plug-and-Play installation
One RJ-45 connector: Auto detection of 10Mbps Ethernet, 100Mbps Fast
Ethernet and 1000Mbps Gigabit Ethernet & Auto MDI-X
Supports 10/100/1000Mbps Auto-negotiation operation
Full Duplex support for 10/100/1000Mb/s data rates
Auto MDI-II/MDI-X crossover for all three speeds
Built-in 8 KB Transmit and 64 KB Receive data FIFOs
Supports IEEE802.1Q VLAN tagging
2 LED indicators for easy diagnostic
3.
Unpacking and Setup
This chapter provides unpacking and setup information for the Switch.
3.1
Package Contents
Under ordinary circumstances, the device will not be affected
by static charge as may be received through your body during
handling of the unit. However, there are special circumstances
where you may carry an extraordinarily high static charge, and
