20
run the CMOS Setup utility, and manually assign a non-
conflicting Interrupt Number.
3.3
Software Installation
Before you connect the 32-bit PCI 10/100/1000Mbps Gigabit Ethernet Card to the
network, you have to install the network driver first. Please follow these instruction
in order to install the device:
1.
Insert the CD-ROM and the Auto-run program will appear. Alternatively,
open a file browser and double click on the autorun.exe file located in
the CD directory. In some specific setting on Windows system, you may
need to proceed the software manually, go to your Windows Start menu
and
choose
Run,
type
“
<CDROM>:\A02-
SG32\Driver\<OSVer>\SETUP.EXE
” in the dialog box and click OK.
D:\ will depends on where the CD-ROM drive is located and
<Windows OS> will depend on the Windows OS you are using.
2.
Click on “
A02-SG32
” icon to select Gigabit Ethernet NIC Home Page.
3.
Select the right choice, depending on your operating system, and the
install wizard will begin installing the software. Follow the install wizard
instructions to complete the installation.
